Florida Seal & Rubber Co. Logo
Welcome to Florida Seal & Rubber Co.About Florida Seal & Rubber Co.FSR ProductsFSR Glossary and Specification TablesContact Florida Seal & Rubber Co.
Extrusions

Extruded Rubber

The use of extruded seals is extremely diverse. You will find extrusions in many types of manufacturing processes for a variety of purposes. Applications include, but are not limited to:

  • Door and Window Seals in the Architectural Environment and Automotive, Appliance and Aircraft Industries
  • Bearing Seals
  • Bumpers
  • Heater Gaskets
  • Radiator Overflow Tubing
  • Vacuum Cleaner Belts
  • Ladder Foot Grips
  • Cushions on Bars or Handles

The applications are endless and expanding rapidly with innovative engineering of extrudable materials.

Materials which can be extruded include dense rubber, foam and sponge from a variety of compounds to meet your specific environment and application. These compounds include Nitrile, Natural, Neoprene, Viton®, Urethane, Silicone and many others. Whether your application requires a long or short run, Florida Seal & Rubber Co. will service your needs with the appropriate compound.

Extrusions can be diversified for use by many secondary operations such as cut lengths, vulcanized to be endless, and formed and notched to allow a variety of shapes and sizes of products.

Most extrusions are custom profiles which are tooled to meet your blueprint requirements. This is an extremely competitive method of manufacturing due to reasonable tooling costs. There are also standard cord (rod), tubing and channels available.

The following tolerance tables have been developed by the Rubber Manufacturers Association to assist in your design work.

Summary of RMA Drawing Designations Extended Rubber Products
RMA Class Dimensional
Tolerance*		 Cut Length
Tolerance*		 Spliced Length
Tolerance*		 Mandrel Cured*
1
2
3
4		 E1
E2
E3
-		 L1
L2
L3
-		 S1
S2
S3
-		 EN1
EN2
EN3
-

Standard Cross-Sectional Tolerance
RMA Class
1
High Precision		 2
Precision		 3
Commercial
Drawing Designation
E1 E2 E3
Dimensions (in Millimeters)  
Above Up to
0 1.5
1.5 2.5
2.5 4.0
4.0 6.3
6.3 10
10 16
16 25
25 40
40 63
63 100
     
+0.15 +0.25 +0.40
0.20 0.35 0.50
0.25 0.40 0.70
0.35 0.50 0.80
0.40 0.70 1.00
0.50 0.80 1.30
0.70 1.00 1.60
0.80 1.30 2.00
1.00 1.60 2.50
1.30 2.00 3.20
RMA Class
1
High Precision		 2
Precision		 3
Commercial
Drawing Designation
E1 E2 E3
Dimensions (in Inches)  
Above Up to
0 0.06
0.06 0.10
0.10 0.16
0.16 0.25
0.25 0.39
0.39 0.63
0.63 0.98
0.98 1.57
1.57 2.48
2.48 3.94
     
+0.006 +0.010 +0.015
0.008 0.014 0.020
0.010 0.016 0.027
0.014 0.020 0.031
0.016 0.027 0.039
0.020 0.031 0.051
0.027 0.039 0.063
0.031 0.051 0.079
1.039 0.063 0.098
1.051 0.079 0.126

Cut Lenth Tolerance For Unspliced Extrusion
RMA Class
1
High Precision		 2
Precision		 3
Commercial
Drawing Designation
L1 L2 L3
Length (in Millimeters)  
Above Up to
0 40
40 63
63 100
100 160
160 250
250 400
400 630
630 1000
1000 1600
1600 2500
2500 4000
4000  
     
+0.7 +0.04 +1.6
0.03 0.05 2.0
0.04 0.06 2.5
0.05 0.08 3.2
0.06 0.10 4.0
0.8 0.03 5.0
0.10 0.16 6.3
0.13 0.20 10.0
0.16 0.25 12.5
0.20 0.40 16.0
0.25 0.50 20.0
0.16% 0.32% 0.50%
Length (in Inches)  
Above Up to
0 1.6
1.6 2.5
2.5 4.0
4.0 6.3
6.3 10.0
10.0 16.0
16.0 25.0
25.0 40.0
40.0 63.0
63.0 100.0
100.0 160.0
160.0  
     
+0.03 +0.04 +0.06
0.03 0.05 0.08
0.04 0.06 0.10
0.05 0.08 0.13
0.06 0.10 0.16
0.8 0.13 0.20
0.10 0.16 0.25
0.13 0.20 0.40
0.16 0.25 0.50
0.20 0.40 0.63
0.25 0.50 0.80
0.16% 0.32% 0.50%

Spliced Length Tolerances
RMA Class
1
High Precision		 2
Precision		 3
Commercial
Drawing Designation
S1 S2 S3
Millimeters  
Above Up to
0 250
250 400
400 630
1000 1600
1600 2500
2500 over
+302 +3.2 +7.1
4.0 7.1 8.0
5.0 8.0 9.0
6.3 9.0 10.0
8.0 10.0 11.2
10.0 11.2 12.3
012.5 12.5 16.0
Inches  
Above Up to
0 10
10 16
16 25
25 40
40 63
63 100
100 over
     
+.13 +.25 +.28
.16 .28 .32
.20 .32 .36
.25 .36 .40
.32 .40 .45
.40 .45 .50
.50 .50 .53

Tolerances on Internal Dimensions of Mandrel-Supported Extrusions
RMA Class
1
(High Precision)		 2
(Commercial)		 3
(Non-Critical)
Drawing Designation
EN1 EN2 EN3
Nominal Dimensions
(in Millimeters)		  
Above Up to
0 4
4 6.3
6.3 10
10 16
16 25
25 40
40 63
63 100
100 160
160  
     
+0.20 +0.20 +0.35
0.20 0.25 0.40
0.25 0.35 0.50
0.35 0.40 0.70
0.40 0.50 0.80
0.50 0.70 1.00
0.70 0.80 1.30
0.80 1.00 1.60
1.00 1.30 2.00
0.6% 0.8% 1.2%
Nominal Dimensions
(in Inches)		  
Above Up to
0 0.16
0.16 0.25
0.25 0.40
0.40 0.63
0.63 1.00
1.00 1.60
1.60 2.50
2.50 4.00
4.00 6.30
6.30  
     
+0.008 +0.08 +0.014
0.008 0.010 0.016
0.010 0.014 0.020
0.014 0.016 0.028
0.016 0.020 0.032
0.020 0.028 0.040
0.028 0.032 0.051
0.032 0.040 0.063
1.040 0.051 0.079
0.6% 0.8% 1.2%
Viton® is a registered trademark of DuPont Dow Elastomers.
Choose a product from the drop-down menu:
-- Home Page | FSR Information | Products | Glossary | Contact FSR --
Small FSR Logo Florida Seal & Rubber Co.
10350 Fisher Ave.   Tampa, Florida 33619
In Florida (800) 282-1601
Phone (813) 681-5502   FAX (813) 654-2525
E-mail Florida Seal & Rubber: Click Here

Copyright © 1998-2003 Florida Seal & Rubber Co.